SONY TV DOUBLE IMAGE SOLUTION


Sony television displays can display a double image vertically or horizontally sometimes. TV Repair man Near Me experts may charge a high fee for resolving this issue. However, most users can fix this problem themselves by adjusting the convergence of the TV Display. To get a good picture, users should adjust the convergence every three months. Here, in this blog post, I will tell you some DIY steps to resolve the Double image problem on Sony TV as well as other common display problems.

PICTURE AND VIDEO ON THE SONY TV IS DISPLAYED DOUBLY (DOUBLE IMAGES/SHADOW)

Please verify the following:

  • Turn off 3D mode and see if the problem is resolved.
  • When you watch a non-3D program in 3D mode, the screen is displayed twice. In this case, press 3D on the remote control and select OFF. For details on how it works, see the manual.
  • If you watch television in a cold place, the image may be durable or the screen may be dark. In this case, the screen returns to normal when the temperature rises.
  • When a stationary image is continuously displayed, sometimes a residual image is generated; over time, however, the screen will return to the normal state. Please use the TV after waiting a moment after turning on the TV.
  1. Disconnect and connect the connector to reset the main unit of the TV and check if the problem is resolved.
  • Turn off the television.
  • Unplug the power cord of the TV from the mains power outlet.
  • Plug the power cord into the power outlet in approximately 2 minutes after.
  • Turn on the TV.
ODD COLORS ON THE SCREEN (SOLARIZATION, NO COLOR, FADED, INTERMIXING/SPREADING OF COLOR)

Press the HOME button on the remote control to enter the TV menu. If there is color fading on the menu screen, there may be a problem with your TV.

  1. If your TV has an image setup reset function, follow the instructions below to reset the settings
  • Press the OPTIONS button on the remote control.
  • Select PHOTO
  • Choose RESET
  • Restart the TV and check if the problem is resolved
  • Turn off the TV and disconnect the power cord.
  • Keep the TV disconnected from the mains for 2 minutes.
  • Plug in the power cord and turn on the TV to check the status.

If the TV is connected to an active and stable Internet connection, install the latest TV software. For more information, you can seek the advice of a TV repairman by Googling ‘TV repair near me.'
If the above steps do not solve the problem, you may need to repair the TV.

IF THERE ARE NO PROBLEMS ON THE MENU SCREEN

You may experience problems with the TV Setting, source signal, cable/satellite decoder, IPTV or other devices, such as a DVD player.

  1. If your TV has an image setup reset function, follow the instructions below to reset the settings.
  • Press the OPTIONS button on the remote control.
  • Select PHOTO
  • Choose RESET.
  1. Verify that the general connections are configured correctly. Visit our website to access the Connectivity Guide.
  2. When an antenna is used, transmission signals are reflected from nearby mountains or tall buildings in the area and can generate ghost images in the image.
  3. It is recommended to adjust the orientation and position of the antenna.
  4. Turn off all electrical or battery-powered equipment that may cause radio interference.
  5. Reset your TV to factory settings.

LAST POINT




If you are having trouble connecting a TV and an audio/video device using an analog cable (composite or component cable) or an HDMI cable, read the articles on our website before performing the following steps. If the problem persists, it may be necessary to repair the product from an expert TV repairman. To find a TV repairman near you Google ‘TV repairman near me.’

Comments

Popular posts from this blog

SAMSUNG TV POWER BUTTON LOCATION

How do I change my password for the SBCGlobal net?

Can I keep my SBC Global email if I cancel AT&T?